제품 세부 정보

모델 번호	HX-200N-5	리드타임	48시간 이내: 일반 재고 모델의 경우
브랜드 이름	후우시 / OEM		1-2주: OEM 주문의 경우
원산지	후난, 중국	보증	3년
최소주문수량	100PCS/모델	샘플 정책	무료 샘플 1-3PCS/모델
맞춤형 비용	맞춤형 스티커/인쇄는 무료입니다. 맞춤형 상자는 각각 1000개 이상 무료로 제공됩니다.
지불 조건	T/T, Western Union, 머니그램	공급 능력	22,000pcs 하루에
애프터세일즈	수집된 통계에 따르면 < 0.3%; 필요한 경우 결함이 있는 제품에 대한 교체 사진 또는 추가 적용 세부 정보
포트 지원	광저우, 심천, 상하이, 닝보, 이우, 기타 본토 항구
가격	자세한 문의를 주시면, 정확한 견적을 24시간 이내에 이메일로 보내드립니다. Inquiry to: [이메일 보호]

제품 설명

제품 설명

Slim size 30mm high duel side LED screen power supply, led display power supply, 5v single output DC 5v 40a

Specification

입력	산출	Dimesion (mm)	IP grade	Protection	능률
180~240v AC	5v 40amps	188*82.5*30	IP 20	over voltage, over load, short circuit	>88%

Installation

Features

DUAL TRANSISTOR FORWARDER SCHEME

Adopt advanced power management chip scheme which is mature and reliable for many years Two-transistor forward uses two mosfets. mosfet has small impedance, low loss, high efficiency,low temperature rising.

MANUFACTURING PROCESS

By applying smd chip technology and smd components,significantly improve product stability, reduce the power supply's weight.

TRANSFORMER

Pure copper winding, secondary winding specially added copper slice as a heat conduction material, effectively control temperature rising.

OUTPUT INDUCTOR

More coil turns and higher permeability leads to high inductance.Output inductor using sendust as core material. With high inductance,power supply's size is smaller and weight is lighter.

EMI CIRCUIT: Adopt first order EMI filter circuit to meet EMI requirements and design standard, effectively avoid display interference caused by power supply.

PROTECTION CIRCUIT

With built-in separate overload, short circuit protection circuit to ensure that in case user's system is abnormal, no safety problems occurs, neither damage occurs to the system. Provide stable, reliable and safe power supply to customers.

INPUT CHARACTERISTICS

Rated Input Voltage: 200~240Vac

Rated Input Frequency: 50/60Hz

Input Current: 2.3Amps max At any input voltage and rated, DC output rated load.

Inrush Current: 50 Amps Max. Cold start at 240Vac input, with rated load and ambient 25 ℃ .

AC Leakage Current: 3.5mA Max. at 240 V ac input.

OUTPUT CHARACTERISTICS

전압	Min Load	정격 부하	Peak@10ms	정격 출력 전력
5V DC	0 amps	40 amps	240 W	200w

Combined Load/Line Regulation

전압	Min Load	정격 부하	라인 규제	부하 조절
5V DC	0 amps	40 amps	+/- 3%	+/- 5%

Ripple and Noise

정격 전압 및 정격 부하에서 최대 대역폭 20MHz, 병렬 47uF/0.1uF를 테스트 지점에서 교차 연결하여 측정한 리플 및 잡음은 다음과 같습니다.

전압	리플 및 노이즈(최대)
5V DC	200mV p-p

 

Turn on delay time

2 Seconds max.at 220V ac input and output max load.

Rise time

800 ms max.at 220V ac input and output max load.

능률

88% min, at 220V ac input voltage and full load calculation efficiency.

Overshoot

5% max when power supply at turn or turn off.

PROTECTION FUNCTION

Over current Protection:
The power supply will be auto recovered when over current faults remove.

 

Operating Temperature

-20℃ to 40℃ ,Full load , Normal operation.

Storage Temperature

-20℃ to 40℃ ,with package..

Relative Humidity

5%(0 ℃ )~90%(40℃ )RH, Full load, Normal operating.

SAFETY AND EMI REQUIREMENT

Design by IEC60950 standard.

DIELECTRIC STRENGTH Hi-Pot

Primary to secondary: 1500Vac/10mA/60S for type test.

Primary to case: 1500Vac/10mA/60S for type test.

Secondary to case: 300Vac/10mA/60S for type test.

Iusulation resistance

Primary to secondary: 10MΩ min at 500V DC.

EMI STANDARD

Designed according to the following standards

<1>. Fcc class B rules
<2>. EN55022 class B rules
<3>. GB9254-1998,GB17625.1-2003